• Nuevo

Emisora Transceptor HF/50 Icom IC-7300

1.173,71 €
Últimas unds.

El nuevo y revolucionario Icom IC-7300, equipo con apariencia clásica pero con SDR integrado. La nueva apuesta de Icom por la actual tecnología.

 

Con este producto ganarás 586 Puntos (11,72 €). Con tu carrito de compra actual 586 puntos = 11,72 €.


Pago a plazos con tu tarjeta bancaria

  • 402,98 €
  • 305,17 €
  • 207,36 €

Más información

Financia tu compra

114,81 € / mes
cuotas

Proveedor

MTF Electrónica y Telecomunicaciones
C/ S. Isidro, 68, Local 2, Edificio Flor, Los Realejos, ,
Lunes - Viernes 9.00h - 13.00h / 16.00h - 20.00h, Sábado: 9.00h - 13.00h

Ubicación de la tienda

General

Frequency coverage

Rx*
0.030–74.800MHz
(Guaranteed range: 0.500–29.999,
50.000–54.000MHz,70.000–70.500MHz.) 

Tx*
1.800–1.999MHz, 3.500–3.800MHz, 
7.000–7.200MHz, 10.100–10.150MHz,
14.000–14.350MHz, 18.068–18.168MHz, 
21.000–21.450MHz, 24.890–24.990MHz,
28.000–29.700MHz, 50.000–52.000MHz, 
70.000–70.500MHz

* 70 MHz band is for EUR version. Each frequency range is differ according to versions.

Mode SSB, CW, RTTY, AM, FM
Number of channels 101 (99 regular, 2 scan edges)
Antenna connector SO-239 (50Ω)
Power supply requirement 13.8V DC ±15%
Power consumptionTx 21A (at 100W output power)
Rx 0.9A typical (Standby),
1.25A (Maximum audio)
Operating temperature range –10˚C to +60˚C; 14˚F to 140˚F
Frequency stability Less than ±0.5ppm
(–10˚C to +60˚C; 14˚F to 140˚F)
Frequency resolution 1Hz
Dimensions (W×H×D)
(projections not included)
240×94×238mm;
9.45×3.7×9.37in
Weight (approximately) 4.2kg; 9.26lb

 

Transmitter

Output power 
(HF/50MHz)
SSB, CW, FM, RTTY 2–100W (HF/50MHz), 2–50W (70MHz)
AM 1–25W (HF/50MHz), 1–12.5W (70MHz)
Modulation system SSB:
Digital P.S.N. modulation

AM:
Digital Low power modulation

FM:
Digital Reactance modulation
Spurious emissions Less than –50dB (HF bands),
Less than –63dB (50MHz band),
Less than –60dB (70MHz band)
Carrier suppression More than 50dB
Unwanted sideband More than 50dB
Microphone impedance 600Ω

 

Receiver

Receiver system Direct Sampling Superheterodyne
Intermediate frequency 36kHz
Sensitivity SSB/CW: (10dB S/N)
1.8–29.999MHz 0.16μV (Preamp 1 ON)
50MHz 0.13μV (Preamp 2 ON)
70MHz 0.16μV (Preamp 2 ON)

AM: (10dB S/N)
0.5–1.8MHz 12.6μV (Preamp 1 ON)
1.8–29.999MHz 2.0μV (Preamp 1 ON)
50MHz 1.0μV (Preamp 2 ON)
70MHz 1.0μV (Preamp 2 ON)

FM: (12dB SINAD)
28.0–29.7MHz 0.5μV (Preamp 1 ON)
50MHz 0.25μV (Preamp 2 ON)
70MHz 0.25μV (Preamp 2 ON)
Squelch sensitivity (Threshold) SSB: Less than 5.6μV, 
FM: Less than 0.3μV
(HF: Preamp 1 ON, 50/70MHz: Preamp 2 ON)
Selectivity (sharp filter shape) SSB (BW: 2.4kHz)
More than 2.4kHz / –6dB
Less than 3.4kHz / –40dB

CW (BW: 500Hz)
More than 500Hz / –6dB
Less than 700Hz / –40dB

RTTY (BW: 500Hz)
More than 500Hz / –6dB
Less than 800Hz / –40dB

AM (BW: 6kHz)
More than 6.0kHz / –6dB
Less than 10.0kHz / –40dB

FM (BW: 15kHz)
More than 12.0kHz / –6dB
Less than 22kHz / –40dB
Spurious and image rejection ratio HF: More than 70dB
50/70MHz: More than 70dB (Except for ADC Aliasing)
Audio output power More than 2.5W
(at 10% distortion with an 8Ω load, 1kHz)

 

Tuner

Frequency range 1.9–70MHz bands
Matching impedance range 16.7Ω–150Ω unbalanced (VSWR better than 1: 3)
Tuning accuracy VSWR 1: 1.5 or less
Tuning time 2–3 seconds (Maximum 15 seconds)



All stated specifications are subject to change without notice or obligation.

1 Elemento
6.00 kg
0.00 x 0.00 x 0.00 cm